Lasko Motion X 27-inch Ceramic Console Heater (CC27350) review

The Lasko Motion X CC27350 is a tall ceramic console with a feature combination that is easy to misunderstand: its base can turn side to side, its front grille can move up and down, and it offers three heat levels plus a separate fan-only mode. It also comes with a remote and a 12-hour shutoff countdown. Those choices can help in a supervised dry room where a heater’s height and generous open space are manageable; none removes the placement rules in the exact manual.

Make room for the body and the safety clearances

Lasko identifies this current U.S. configuration as Black model CC27350, a single-SKU product in the archived U.S. collection. The manufacturer lists a 26.49-inch height, 11-inch depth and 7-inch width. It is therefore a tall, relatively narrow console rather than a low baseboard-style shape. The page lists its weight as 8.5 pounds, while the native variant record says 8,165 grams—about 18 pounds. The manual does not settle that discrepancy, so do not rely on a particular weight for carrying or storage decisions.

Body size is only one part of fit. The manual calls for a stable, flat, level surface and at least three feet of clearance from combustible material in front and one foot at the sides and rear. Air intake and outlet openings must remain unblocked. That operating footprint can make a tall console inconvenient beside seating, curtains or narrow walkways even if the body itself fits the available corner.

Air movement is the Motion X’s clearest distinction

The manual gives the base and grille their own movement controls. Lasko lists 72 degrees of horizontal oscillation and describes 20 degrees of vertical grille movement. These figures document mechanical movement; they do not show that every part of a room gets the same warmth. Lasko also lists a maximum coverage area of 300 square feet, which is a manufacturer claim rather than an independent room-heating test. Treat the two-axis layout as a way to change where the outlet points, not as a guarantee of uniform temperature.

Its control panel separates three heat settings—H1 Low, H2 Medium and H3 High—from a fan-only F mode. The product page gives an overall 900-to-1,500-watt output range and 120-volt supply, but neither page nor manual assigns a wattage to each heat step. Fan-only moves the room’s existing air; it is not cooling, and the materials do not document several independent fan-only speeds.

Auto Eco, the timer and the remote do different jobs

Auto Eco is the adjustable thermostat routine. The manual says the heater uses High while room temperature is below the selected target, then uses Low from the target until the room reaches two degrees above it. Above that point the heating element turns off, while the fan continues for about 15 seconds. The display reads room temperature, not the temperature of the air at the outlet. This is a description of the maker’s control sequence, not an accuracy measurement; the manual does not provide a temperature range or a wattage table for H1, H2 and H3.

The remote is listed as included with two AAA batteries. It can set the timer for automatic shutoff up to 12 hours, using half-hour steps through two hours and hourly steps after that. It does not schedule a later start. A display-snooze button on the remote turns the control lights off, and the display automatically dims after ten seconds. The page does not list app compatibility or a named Night Mode.

A child lock is present, but its behavior matters. Holding the button for three seconds disables heater functions other than Power; functions already in progress stay active. Unplugging clears the lock. That can reduce accidental setting changes, but it does not prevent the heater from being powered on and is not a childproofing substitute.

Daily setup and care stay simple but specific

The heater has a front filter cover that can be removed for cleaning. The manual directs owners to vacuum the intake grills every two weeks, unplugging the unit before cleaning or moving it. It says not to disassemble the heater or use water, solvents or harsh cleaners on the body. If the thermal overload trips, the manual instructs the owner to unplug the heater and wait ten minutes before resetting it.

For electrical setup, the manual requires plugging directly into a 120-volt wall outlet. It prohibits extension cords, power strips, adapters and other cord-connected devices; it also says not to place multiple devices on the same outlet or circuit. Keep the heater away from damp or wet locations, bathrooms, laundry areas, combustible materials and outdoor use. Most importantly, the manual says not to leave the heater operating unattended. An auto-off timer, tip-over switch and overheat protector do not override that instruction.

Who should compare it with another console?

The CC27350 is a plausible fit when you want a remote, fan-only circulation, adjustable heat and both horizontal and vertical movement, and you can keep the full clearance area open during supervised use. If a shorter body matters more, compare the Motion Heat Plus CC23161: its listed height is 22.58 inches, versus 26.49 inches here, and its auto-off countdown ends at eight hours rather than twelve. Lasko gives the CC27350 a 300-square-foot maximum coverage claim and the CC23161 a 200-square-foot claim, but neither figure is a room-by-room test. The CC27350 adds a documented 72-degree horizontal arc and a child lock that the CC23161 page does not list; the lock still leaves Power working.

Choose by the documented body shape, timer, movement and safe placement that fit your room—not by an unverified weight or a broad coverage phrase. For more exact contrasts, see the Motion Heat Plus CC23161 review and the Motion X versus Motion Heat Plus guide. Use the Lasko product page and its CC27350 manual for current instructions and warranty information.