Model assessment · Lasko

Lasko CC24910 Ceramic Console Space Heater review

A floor-standing, fan-forced ceramic console with two heat modes, an included remote, an eight-hour shutoff countdown and a hand-adjustable vertical air louver. Current page-linked instructions restrict automatic temperature cycling to High; no fan-only mode, app control or oscillation is documented.

Sources checked 2026-10-23 · Our editorial approach

We may earn from qualifying purchases. Compare the exact model, size and package.

Black Lasko CC24910 ceramic console space heater with upper control display and front grille
Official Lasko product-page image for the exact Black CC24910 single-SKU row; studio photograph-versus-render status is uncertain. Lasko
A useful fit for

A residential dry-indoor floor console when the included remote, two heat settings, hand-adjustable vertical louver and up-to-eight-hour shutoff countdown suit the routine. Its published body is 23.23 inches high and needs 36 inches in front plus 12 inches at the sides and rear; check both body fit and clearance space.

The main tradeoff

It has no app, fan-only mode, powered oscillation or scheduled start. The current page-linked manual limits automatic temperature cycling to High, while an older official revision describes High or Low, so Low-mode thermostat behavior is revision-sensitive. Exact Low wattage and weight are unresolved; Lasko's 750–1,500 W range is not mapped by mode, and its 8.82-lb page value conflicts with a 9,979-g native variant weight field. The 200-sq-ft coverage, quiet and cyclonic claims are not independent test results. The manual excludes wet/bathroom/outdoor use and unattended operation.

Your needs, this model

Does it fit your priorities?

Do you need a handheld remote to change settings from your seat?

The Black CC24910 includes a multi-function remote, but you must supply two AAA batteries. It is not app-controlled.

Explore this need in the finder →
Do you need an eight-hour shutoff countdown, or a heater that starts later?

The current CC24910 instructions document an off countdown of up to eight hours, not a scheduled start.

Explore this need in the finder →
Do you want to aim warm airflow up or down by hand?

Yes. A top-front louver slides by hand to adjust vertical airflow. The exact page says no oscillation; this is not motorized sweep.

Explore this need in the finder →
Will the 23.23-inch body fit beneath your height limit?

It fits a 24-inch body-height limit but not 22 inches. The clearance envelope is separate: three feet in front and one foot at the sides and rear.

Explore this need in the finder →
Does the exact manual allow this heater in a bathroom?

No. The current CC24910 instructions exclude bathrooms, laundry areas and wet or damp locations; do not treat overheat protection as water approval.

Explore this need in the finder →
Do you need the heater to sweep side to side while it runs?

No. The current page lists no oscillation, although a manual louver can aim the outlet vertically.

Explore this need in the finder →

The Lasko CC24910 is a floor-standing, fan-forced ceramic console for a dry indoor room where you want a handheld remote, two heat settings, an eight-hour shutoff countdown and a manually aimed vertical outlet. It does not oscillate, provide a separate fan-only mode or start on a schedule. Its safety envelope is much larger than the appliance body: allow three feet in front and one foot at each side and behind it.

A single black console, not a tiny personal heater

Lasko’s current U.S. page identifies model CC24910 in Black. The archived All Heaters row and product record show one Black variant, SKU CC24910, with the dated inventory snapshot marking it available. The maker lists a 23.23-inch height, 15.65-inch width and 7.65-inch depth; measure the actual floor area and clearances rather than relying on the “space-saving” label. The page gives 8.82 pounds, but the same product’s native variant record lists a shipping-weight field of 9,979 grams. Because those values conflict, we do not use a weight for matching or promise how easy it is to move.

The current page describes cyclonic ceramic heat, 120-volt operation and a maximum 1,500-watt output. Its specification range is 750–1,500 W, but it does not map an exact wattage to each selectable level; the manual confirms High and Low without publishing a Low figure. There is no fan-only choice: its fan runs as part of heating and continues briefly after thermostat cycling. Lasko claims coverage up to 200 square feet and describes the settings as quiet, but those are maker claims, not independent room-size, noise, airflow or efficiency measurements.

The remote and louver solve different convenience problems

The included physical remote changes settings from across the room, but it needs two AAA batteries that are not included. This is not a smart heater: the current listing says there is no app compatibility. A hand-sliding louver on the upper front grille lets you direct airflow vertically. It is manual adjustment, not a motorized tilt; the heater has no side-to-side oscillation. If a room needs moving heat across seated positions, choose a model whose exact product page and manual document that movement instead of treating a fixed outlet as a sweep.

The manual documents two heat modes and an automatic-temperature mode that, in the current page-linked Rev. C (3/26) instructions, operates only on High. A separate older Lasko CC24910 support manual (Rev. 3/20) describes automatic temperature control in either High or Low. That exact-model revision difference matters if you specifically depend on temperature cycling while using Low. For that need, check the instructions shipped with the exact unit and do not assume that an old support file describes every current version. The display is not an independent room thermometer; the current manual says it displays room temperature rather than discharge-air temperature.

The timer is a countdown of up to eight hours that turns the heater off. It is not a later-start timer, and the manual says not to leave the heater operating unattended. Choose it if you want to set a shutoff while you remain present; reject it if your essential requirement is scheduling warmth to begin before you arrive.

Placement and care are part of the decision

The current manual calls for a stable, flat, level surface and a direct 120-volt wall receptacle. It prohibits extension cords, power strips, multiple-outlet adapters and other cord-connected devices, and says not to plug multiple devices into the same receptacle or circuit. Keep combustibles at least three feet from the front and one foot from the sides and rear. That clearance means the maker’s wall-hugging design language is not permission to place it flush against a wall; preserve the stated rear clearance.

CC24910 is for residential indoor use. The manual excludes bathrooms, laundry areas, wet or damp locations, outdoor settings, hazardous locations and agricultural use. It also says not to leave the heater unattended, warns to keep the remote away from beds and chairs where it could be pressed accidentally, and directs owners to unplug before moving or cleaning. The listing and manual describe overheat protection; the exact current page does not establish a tip-over switch or child lock, so neither should be assumed. A “cool-touch” housing claim does not cancel the manual’s clearances or burn warnings.

Maintenance is simple but recurring: unplug first, vacuum the intake grilles with a brush every two weeks, and do not open the housing or use solvents. If the overheat protector trips, the current manual says to unplug the unit, let it cool for ten minutes and reset it. Those instructions, rather than the presence of an automatic cutoff, determine the routine this model requires.

Who should choose it?

CC24910 is a fit when you need a Black floor console, a remote, manually directed vertical airflow and an off countdown of no more than eight hours—and the room permits the full clearance envelope. The finder can keep those requirements together in one dry indoor floor-use plan. It should fall out for a bathroom or outdoor request, a later-start timer, required oscillation, a fan-only mode, a body-height cap below 23.23 inches, or a requirement for documented Low-mode thermostat cycling without checking the unit’s own revision.

Consider the shorter Lasko CC13700 if body height matters more than a remote: it is listed at 13.5 inches and has a similar two-setting, eight-hour-countdown role, but its page says no remote. The CC20125 is a different console tradeoff if three selectable heat levels and a longer, 12-hour shutoff timer matter; compare its exact footprint and instructions before deciding. None of those feature differences proves which heater warms a particular room better. Measure the body and safety space, confirm the outlet and supervision routine, then choose controls that solve a real need.

Primary references: Lasko’s CC24910 product page and its page-linked Rev. C instructions. The older official Rev. 3/20 support manual describes the thermostat control differently.

Key details at a glance

Maximum listed input1500 W
US supply voltage120 V
Published body height23.23 in
Published body width15.65 in
Published body depth7.65 in
Installation formFloor-standing and movable
Exact manual permits bathroom useNo
Power-heat levels2
Listed wattage values1500 W
Separate fan-only modeNo
Documented fan-only speeds0
Timer behaviorThe current page-linked CC24910 Rev. C 3/26 manual documents a shutoff countdown of up to 8 hours, not a later start. The manual says automatic temperature cycling works on High only. An older official Rev. 3/20 CC24910 manual describes temperature mode on High or Low; if Low-mode cycling is essential, inspect the exact unit's supplied instructions.
Can the heater start on a timer?No
Phone-app controlNo
Fanless convection heatingNo
Heated-air directionfocused
Manual vertical outlet tiltYes
FortPlug plug-area overheat cutoffNo
ALCI leakage-current plugNo

Use the exact model’s instructions for operating limits, supplied equipment and version differences.

Sources for this assessment

Check whether the room and routine line up.

Check room restrictions and full wall clearances first, then compare fan-only versus fanless heat, fit, app controls and the timer behavior the exact manual describes.