Your needs, this model
Does it fit your priorities?
Do you need two distinct heat levels with known wattages?
Yes: the 6050 manual names High at 1,500 W and Low at 750 W. Its thermostat works only on High; these are manufacturer settings, not independent room measurements.
Explore this need in the finder →Would a hand-adjustable vertical louver work, or must the outlet move by itself?
The manual says the top-front louver slides by hand to adjust airflow vertically. It gives no degree range and does not document powered movement.
Explore this need in the finder →Is separate fan-only airflow essential?
The 6050 manual does not document a user-selectable fan-only mode; a brief fan run-on after thermostat cutoff is not a fan-only setting.
Explore this need in the finder →Would you use an off countdown rather than a later-start schedule?
Its exact manual allows a one-to-seven-hour countdown that shuts off a running heater; it does not schedule a later start.
Explore this need in the finder →Do you need the thermostat to use a lower heat stage automatically?
No. On this exact model, automatic temperature control operates only on High; Low is a fixed 750-W selection. A documented thermostat-controlled Low stage is an important distinction if it is essential.
Explore this need in the finder →Is a physical remote or app control essential?
Lasko lists no remote and no app compatibility for model 6050, so its settings are changed on the heater.
Explore this need in the finder →Will its 24.9-inch body fit your height limit?
The manufacturer lists a 24.9-inch body. It fits a 25-inch cap and fails a strict 24-inch cap; required operating clearance is separate.
Explore this need in the finder →Will you use it in a bathroom, wet area or unattended?
The exact manual prohibits bathrooms, laundry, damp/wet and outdoor use and says not to leave it operating unattended. Overheat protection does not change those rules.
Explore this need in the finder →The Lasko 6050 is a wide, floor-standing ceramic console for dry indoor supplemental heat. Its distinguishing controls are unusually straightforward: a true 750-watt Low setting, 1,500-watt High, a thermostat that works only on High, a seven-hour off timer, and a hand-sliding louver that changes airflow vertically. It is not a remote-controlled oscillating tower, and the upper louver does not move by itself.
One Black configuration, one exact 6050 manual
The current U.S. Lasko All Heaters collection lists product 8636496118037 with one Black variant, SKU 6050. Its linked manual names Model 6050, so the control decisions below are attached to that single configuration rather than inferred from a similar console. The page shows it as currently available on the date checked; that is a snapshot, not a stock promise.
Lasko lists a 24.9-inch height, 16.8-inch width and 6.5-inch depth. The body is console-shaped and broad rather than a narrow tower, so measure the floor area before buying. The page also shows 15.48 pounds, but the native variant record has a unitless weight value that does not reconcile with that claim. I leave weight unknown rather than choose one number. The pictured heater is a manufacturer product image; whether it is photography or a render is not verified.
What the two heat modes actually do
The manual specifies High at 1,500 watts and Low at 750 watts. The page gives the same output range, but the manual is what connects each wattage to a named setting. A separate automatic thermostat routine works only while the heater is on High. It shuts heating off when the room reaches two degrees above the chosen temperature and resumes at one degree below it. The fan can run for about fifteen seconds after the element stops; that run-on is not a user-selectable fan-only mode.
This distinction matters if you prefer gentle Low heat for an extended session. You can choose 750 watts, but the manual does not let the thermostat cycle that Low mode to a chosen setpoint. If you want setpoint cycling, it must be on High; if you need separate airflow without heat, choose a model whose manual explicitly lists fan-only. The page's 200-square-foot maximum is a manufacturer coverage statement, not an independent test. Room insulation, ceiling height, outdoor temperature and layout all affect whether a 1,500-watt portable heater is sufficient.
Manual aim, not automatic sweep
A sliding control at the top-front grille adjusts the outlet louver vertically by hand. That lets you change where the airflow points before or during use, but the instructions give no degree range and do not describe a motorized sweep. The product page says there is no oscillation. The louver therefore should not be counted as horizontal rotation, full-circle distribution or powered movement. If keeping the heat aimed at one part of the room is the goal, it may be useful; if the direction must change on its own, the CT24362 or another documented oscillating model is a better comparison.
Lasko states that the 6050 has two heat settings, a programmable thermostat, overheat protection, an ETL listing, a cool-touch housing and a three-year limited warranty. The thermostat behavior and safety limits in the manual are more useful than broad marketing language. A cool-touch claim is not an independent surface-temperature measurement, and an overheat cutoff does not make an appliance safe to cover or use near water.
Timer and direct-outlet placement
The timer is a one-to-seven-hour auto-off countdown for a heater that is already on. It is not a schedule that starts the unit before you arrive. Lasko's manual says not to leave the heater running unattended, which makes the countdown a way to end a supervised session—not permission to leave it heating an empty room. The exact listing says no remote, and it gives no app compatibility, so settings are changed at the console.
Plan for the manual's placement rules before choosing a spot: a firm, flat, level floor; a direct 120-volt wall outlet only; at least 36 inches in front and 12 inches at each side and rear from combustible material. Do not use an extension cord, power strip, surge protector or multi-outlet adapter. Bathrooms, laundry rooms, damp or wet areas, outdoors, agricultural settings and unattended operation are excluded. The manual also notes that the rubber feet may mark some wood or furniture finishes. For upkeep, unplug before cleaning and vacuum the intake grilles every two weeks; do not take the heater apart.
Who should compare another shape
Choose the 6050 when the combination of low/high wattage, hand-adjustable vertical airflow and a simple off timer fits a compliant dry room. Its 24.9-inch body is too tall for a strict 24-inch cap, and the wider console needs more floor width than a tower. The smaller CT24362 trades the 6050's known 750/1,500-watt steps and hand-set louver for three heat levels, a remote and a selectable 90/180/360-degree sweep; it also has no fan-only mode. The CC24810 offers three heat levels, fan-only speeds and powered louvers, but its remote package remains unclear in Lasko's own listing. Each manual has different limits—choose around the control that matters, and keep the required clearances in every case.
Key details at a glance
| Maximum listed input | 1500 W |
|---|---|
| US supply voltage | 120 V |
| Published body height | 24.9 in |
| Published body width | 16.8 in |
| Published body depth | 6.5 in |
| Installation form | Floor-standing and movable |
| Exact manual permits bathroom use | No |
| Power-heat levels | 2 |
| Listed wattage values | 750 / 1500 W |
| Separate fan-only mode | No |
| Documented fan-only speeds | 0 |
| Maximum documented horizontal sweep | 0° |
| Timer behavior | Exact manual allows 1–7-hour automatic shutoff. Its programmable thermostat operates only with High heat; it switches heating off at 2°F above the selected setpoint and back on at 1°F below. The fan continues about 15 seconds after the element shuts off. No later start or selectable fan-only mode is documented. |
| Can the heater start on a timer? | No |
| Phone-app control | No |
| Fanless convection heating | No |
| Heated-air direction | focused |
| Manual vertical outlet tilt | Yes |
| Powered outlet louvers | No |
Use the exact model’s instructions for operating limits, supplied equipment and version differences.
Sources for this assessment
Check whether the room and routine line up.
Check room restrictions and full wall clearances first, then compare fan-only versus fanless heat, fit, app controls and the timer behavior the exact manual describes.
