Your needs, this model
Does it fit your priorities?
Do you need Wi-Fi schedules from a fixed wall heater?
The A-1500-SED-WI page and matching manual document wall mounting, phone scheduling and 750/1,500-watt heat.
Explore this need in the finder →Would you use a separate fan-only mode when you do not need heat?
The manual explicitly describes switching between fan-only and heat modes; this is separate from choosing a low heat level.
Explore this need in the finder →Is a 120-volt wall heater with an included remote appropriate?
The page identifies a 120-volt wall-mounted model and lists a remote in the box. Bathroom and wet/moist operation are not permitted by the manual.
Explore this need in the finder →The Sedona A-1500-SED-WI is a 1,500-watt Wi-Fi infrared wall heater with an uncommon, explicitly documented fan-only mode. It is a better fit for someone who wants scheduled wall heat plus summer air circulation than for a shopper looking for a flexible floor unit or a heater approved near water.
Which Sedona this review covers
The exact Heat Storm collection row is product 6996606091325, SKU A-1500-SED-WI. Its linked manual is titled HS-1500-SED-WI; the retail and service prefixes differ, but the shared model family, 1,500-watt rating and matched page/manual bridge support this configuration. Heat Storm lists two heat outputs, 750 and 1,500 watts, and describes an internal thermostat, phone-app schedules, touchscreen controls, child lock and a remote. It is a 120-volt wall unit, not a floor heater. The page also gives a 42–47 dB sound range and claims up to 150 square feet as primary heat and 750 as supplemental heat. Those area figures are manufacturer guidance, not a measured promise for a particular home.
Several physical specifications conflict between the exact page and manual. The product page lists a 19-by-4.75-by-13.25-inch body, 7.72 pounds and a 36-inch cord; the manual’s specifications show 19 by 4 by 13 inches, 6.1 pounds and a 73-inch cord. Those disagreements are too large to use confidently for a tight space or outlet reach. I leave dimensions, weight and cord length unresolved rather than choosing the number that looks more convenient. Check the received unit and current documentation before planning around a cabinet opening, mounting point or nearby receptacle.
Why the fan-only mode matters
Many heaters use a fan whenever they make heat but cannot circulate air without heating. The Sedona’s manual explicitly says its fan icon switches between fan-only and heat modes; its product page likewise advertises a fan-only mode for warmer months. That is a genuine functional distinction, not a marketing synonym for low heat. The same manual documents phone pairing, a selectable thermostat and remote operation. If the room is cool and you want controlled heat, the two wattage levels offer a lower setting before the maximum. If no heat is needed, the separate fan-only mode provides circulation without invoking a heat setting.
This wall-first arrangement trades mobility for a cleared floor. Mount it according to the installation instructions, secure it correctly, and keep at least three feet clear in front of the outlet. The manual warns that the heater becomes hot in operation and excludes wet or moist locations. That warning overrides product-page language calling it bathroom-safe or describing a safe-to-touch grille: a marketing phrase is not approval for a damp room, and no grille-temperature test is supplied. Do not place it close to a sink, shower, towel, curtain or other combustible material.
When another Heat Storm model fits better
Compare the Sedona with the A-1500-WALL-R if you want an in-wall installation rather than a surface wall heater. The in-wall unit also reaches 1,500 watts and provides app schedules, but has a different mounting form. The ceramic A-1500-PTC-WI is another 1,500-watt Wi-Fi wall unit; its manual also lists fan-only operation, while its ceramic element and compact product-page dimensions set it apart. For a floor-standing model, the standard Phoenix or Sahara is the more suitable family, but neither is the Sedona’s wall plan.
Choose the Sedona when wall mounting, Wi-Fi schedules and a distinct fan-only mode answer the actual need. Do not choose it because an area estimate sounds like a whole-house guarantee, because its conflicting dimensions happen to fit a drawing, or because a bathroom phrase appears on the page. The current product-page capture displayed sold-out language; availability is separate from the installation decision. The maker does not identify whether the gallery image is a photograph or a render. Review the A-1500-SED-WI product listing alongside the HS-1500-SED-WI manual; when physical details differ, confirm the exact version with Heat Storm before buying.
Key details at a glance
| Maximum listed input | 1500 W |
|---|---|
| US supply voltage | 120 V |
| Installation form | Fixed wall installation |
| Exact manual permits bathroom use | No |
| Power-heat levels | 2 |
| Listed wattage values | 750 / 1500 W |
| Separate fan-only mode | Yes |
| Phone-app control | Yes |
| Fanless convection heating | No |
| Control lock | Yes |
| Documented electrical connection | Plug-in connection |
| Heating element description | Forced-air quartz infrared |
Use the exact model’s instructions for operating limits, supplied equipment and version differences.
Sources for this assessment
- Heat Storm Sedona Wi-Fi Heater official product page
- Heat Storm U.S. Indoor Heaters native collection page 1
- Heat Storm official manual directory
- Heat Storm Sedona Wi-Fi infrared heater retail SKU A-1500-SED-WI; matching manual HS-1500-SED-WI official user manual
- Heat Storm Sedona Wi-Fi Heater manufacturer product-page image
Check whether the room and routine line up.
Check room restrictions and full wall clearances first, then compare fan-only versus fanless heat, fit, app controls and the timer behavior the exact manual describes.
