Heat Storm Phoenix Infrared Space Heater review

The standard Heat Storm Phoenix is the floor-capable sibling of the Phoenix Wi-Fi. It is a 1,500-watt infrared heater with a fan, thermostat, remote and included feet; the support manual also documents wall mounting. Pick it when you need that choice of floor or wall installation and do not require app control. Its height is unresolved because the manufacturer’s product page and manual disagree.

Why the non-Wi-Fi model is not just a cheaper Wi-Fi Phoenix

The current Heat Storm U.S. listing identifies White A-1500-PHX and Gray A-1500-PHXG variants. The linked manual names the support family HS-1500-PHX and HS-1500-PHXG. The official page lists a floor base in the box and says the heater can be wall mounted or set on its feet. By contrast, the separate Phoenix Wi-Fi page says wall mount only and explicitly states that feet are not included. The distinction changes where you may use each model: the standard Phoenix has a documented movable floor plan; the Wi-Fi Phoenix does not.

Both standard-Phoenix finishes use the same listed heating plan. Heat Storm describes 750- and 1,500-watt levels plus an automatic Eco mode that changes between them as the set temperature approaches. The linked manual identifies forced-air operation with a quartz infrared element, 120 volts and a 12.5-amp full-power draw. The product page gives a three-foot cord, so choose a wall or floor position where that reach is practical without an extension cord. The manual also documents a remote, child lock and thermostat adjustments. The page/manual family states 19 inches long and four inches wide; only body height is left open below.

A real mounting choice, but still a high-draw appliance

On the floor, the feet must be installed before use and the heater needs a stable, level place with its front clear. On the wall, use the manufacturer’s mounting guide and place it where its short cord can reach a suitable outlet. The manual tells the user to plug directly into a 120-volt wall receptacle, avoid extension cords, power strips and surge protectors, and give the appliance its own circuit. At 1,500 watts the listed current is 12.5 amps; it is not a low-load accessory that can safely be added to any crowded outlet or shared circuit.

Keep combustibles at least three feet from the front. The manual excludes outdoors, closets and wet or moist locations, and cautions that curtains, cords and furnishings belong away from the heater. These rules apply whether the unit is on its feet or mounted. The product page promotes a touch-safe grille, but the manual warns that the heater becomes hot and directs users to avoid direct contact. I follow the manual rather than promising a cool-touch surface. A child lock is a control feature, not a barrier, and it does not remove the need to supervise the room.

The dimensions are a material uncertainty

For planning a wall, shelf or clearance envelope, do not rely on the headline height. Heat Storm’s exact retail page lists 19 × 4 × 16 inches; its linked HS-1500-PHX/PHXG manual prints 19 × 4 × 13 inches. Those are both manufacturer sources tied to this family, so silently choosing the larger or smaller number would turn a real source conflict into false precision. The matcher leaves body height unknown. If a three-inch difference changes whether it fits, ask the manufacturer to confirm the current exact unit’s label before purchase or installation.

The page’s room-area range is manufacturer guidance, not a guarantee. Its manual describes supplemental use and cautions that insulation, ceiling height and open-plan layout affect warm-up and cycling. There is no need to force a room-size recommendation from a 150-square-foot primary-heating label. Decide first whether the mounting arrangement, electrical draw and clearance actually work, then evaluate the heater in the room you have.

Controls, timer and alternatives

The local control panel and included remote are the point of this model: thermostat, low/high/Eco selection, display and a manual timer. The exact manual lets an owner set delayed-on and delayed-off time in hour increments; it does not establish the total upper span in the inspected instructions, so no long timer limit is promised here. The non-Wi-Fi SKU does not document app control. If scheduled operation from a phone is essential, the Phoenix Wi-Fi gives that feature but loses floor use. If you want a smaller wall-only unit and an app is not needed, compare the 1,000-watt standard WX; if you want Wi-Fi and a 1,000-watt limit, compare the WX Wi-Fi.

Two exact color options do not create two heater recommendations: the white and gray variants retain the same stated power and use plan. The archived White manufacturer image is therefore labeled as a representative Phoenix-family view, not a Gray product photograph. The captured product page showed sold-out text while the collection feed’s variant availability did not agree, so confirm the exact A-1500-PHX or A-1500-PHXG and seller terms rather than relying on a snapshot. This model fits best when flexibility between floor and wall use is more valuable than phone control or a certain body-height measurement.