DREO Solaris Max (2nd Gen.) review

The DREO Solaris Max (2nd Gen.) is the shorter tower in this comparison: the current US product page lists a 26.77-inch overall height, a footprint of 8.66 by 8.66 inches and a weight of 8.83 pounds. Its product name calls it a 25-inch heater, but the listed body dimension is taller than 25 inches. Measure using the actual dimension, then leave the operating clearance required by the manual.

A compact heater with a modest swing

The manufacturer’s US product page lists 120V, 60Hz power, up to 1,500 watts, three power-heat levels, ECO and fan-only modes. Its thermostat range is 41–95°F, and the listed oscillation angle is 70°. A remote is included. Those are useful controls for moving the unit between rooms and circulating air in more than one direction, but they do not prove a specific room will reach the displayed setpoint.

The name “Solaris Max” and product-page descriptions use broad coverage language. For a real room, check insulation, drafts, doorway openings and the distance between the heater and the people who need warmth. This is a portable supplemental electric heater, not a replacement for a building’s primary heating equipment or a way to warm an outdoor space.

Read its power settings conservatively

DREO’s current US product page describes a 1,000–1,500-watt range and three heat levels. The US support page places several Solaris Max documentation versions together, including DR-HSH013, DR-HSH013B and DBSH13. The DR-HSH013 US manual names three settings at 900, 1,200 and 1,500 watts, which does not align with the current page’s stated lower bound. The sources agree on a 1,500-watt maximum and three heat levels, but they do not reconcile every per-level watt value for the exact current finish SKU.

For that reason, this assessment does not assign a wattage to H1 or H2. If you need a particular low-setting draw for circuit planning, verify the manual and rating label for the exact unit you are considering rather than relying on the marketing description or a related manual. The manufacturer page also contains differing noise figures in its overview and specifications, so this review does not call it a 25- or 32-decibel heater.

Timer and fan information have limits too

The product page lists a timer from one to 12 hours, while the US manual describes an automatic shutoff timer. It does not establish that the heater can start later from the off position. That is different from the MC706, whose manual explicitly describes an on/off timer. If scheduled start is essential, the finder excludes the Solaris Max rather than assuming every countdown control does the same thing.

The current page confirms fan-only operation but does not list a number of discrete fan speeds or the MC706’s Normal, Natural, Sleep and Auto pattern choices. A fan-only mode is not proof of a particular airflow adjustment. If you need 12 documented fan speeds or a named fan pattern, choose only a product whose manual says so; the MC706 is the confirmed option in this comparison. A separate app-control requirement is also not established here, and the included remote is not a substitute for phone-app control.

Use the right outlet and leave clearance

The US manual for the DR-HSH013 family instructs users not to operate the heater outdoors, to put it on a stable, secure surface and to keep combustible materials at least three feet from the front, away from the sides and rear. It also says not to block the air inlet or exhaust, not to cover the heater, and not to use it near flammables, bath water or in wet areas. The plug should go directly into a suitable wall outlet, not an extension cord or power strip. Unplug and let the heater cool before cleaning; keep the inlet dry and remove dust using a soft, dry cloth.

The manual includes tip-over and overheat protection, but those features do not change the placement requirements. Turn the heater off when leaving the room or going to bed, and keep children, bedding and clothing away from the hot front surface. A 26.77-inch listed height may make the body easier to place than the 42.46-inch MC706, but it does not reduce the required front clearance.

When it makes sense over the other two

Choose the Solaris Max (2nd Gen.) when a sub-27-inch body, 70° oscillation, fan-only mode and basic ECO/heat controls match the room. Its 26.77-inch listed height gives it a fit advantage over both the 718 at 29.7 inches and the MC706 at 42.46 inches. The Tower Heater 718 instead has five heat steps, a three-speed fan and selectable oscillation up to 120°. The MC706 adds 12 fan speeds, Natural/Sleep/Auto patterns and a documented start timer, at the cost of a much taller body.

Use the exact height and documented feature constraints rather than buying from the word “Max.” A 27-inch height limit points to the Solaris Max; a 12-speed fan requirement points to the MC706; and a need for a particular heat-level wattage remains a reason to confirm the exact product manual and label first.