DREO 2-in-1 Tower Fan & Heater 706 review

The DREO 2-in-1 Tower Fan & Heater 706 (MC706; support model DR-HSH016) is the most fan-oriented option in this small tower group. It pairs a 1,500-watt maximum heater with a fan-only mode that has 12 speed levels and four patterns—Normal, Natural, Sleep and Auto. The body is 42.46 inches tall, 12.91 inches wide and deep, and weighs 13.46 pounds, so the extra airflow controls come with a substantial tower rather than a compact tabletop heater.

Its value is in the separate fan job

The manual separates HEAT and FAN functions. In heat mode, the MC706 has five selectable power levels and ECO temperature control; in fan mode, you choose from 12 speeds and the Normal, Natural, Sleep or Auto pattern. It can therefore serve as a heater in cold weather and a circulating fan when the heating element is not being used. It is not an air conditioner: fan-only moves existing room air, not chilled air.

The 718 also has a fan-only mode, but its manual lists three speeds rather than 12 distinct fan levels or the MC706’s four named patterns. Choose the 706 when warm-weather airflow control is an important part of the purchase, not just a bonus. If you only need a heater that can move air at low, medium or high, the 718 is shorter and simpler to position.

Timer behavior is more flexible, with a limit

The MC706 manual describes a 0–12-hour timer that can turn the appliance on or off, depending on whether it is already running. This creates a documented later-start option that the 718’s auto-off timer does not provide. It is still a local appliance timer, not remote scheduling through an app; the reviewed product page and manual do not establish phone-app control.

Temperature control uses a 41–95°F set range in ECO mode. Heat levels are selected separately; the manufacturer’s product page states a 1,500-watt maximum, while the manual names the levels without providing a watt value for each step. Do not use this model if an exact watt draw for a specific lower setting is a firm requirement unless the current label or documentation for your unit supplies that figure.

The 42-inch height and base assembly need real space

Before ordering, measure the full height and the circular base footprint, then check that the cord can reach a suitable wall outlet without crossing a walkway. The manual illustrates attaching the base and routing the cord through it, so this is not the same out-of-box setup as the smaller 718. The included remote is a convenience, but the top control panel remains available for ordinary operation.

Its 120° oscillation can distribute airflow across a wider seated area, but the angle itself does not establish a room-heating coverage guarantee. Do not treat a manufacturer’s airflow or coverage language as a measured whole-room result. Check the actual room, any drafts, the heater’s position and the household’s primary heat source rather than assuming that a taller body replaces central heating.

Keep the safety rules in the same decision

The manual says indoor use only, a stable and level surface, and at least three feet between the front of the heater and combustible materials, with the sides and rear kept clear as well. Do not use it in a bathroom or laundry area, near a bath or water container, or where its inlet or outlet can be blocked. Plug directly into a wall receptacle; do not use an extension cord or power strip. The manufacturer also describes a plug overheat protection feature, but that protection is not permission to use a damaged, loose or overloaded outlet.

Turn it off and unplug it before cleaning. Keep rugs, furniture and cords from obstructing airflow or creating a trip hazard. The manual includes tip-over and overheat protections, but those controls do not replace appropriate placement, supervision or the maker’s instructions. Do not leave a portable heater running unattended or while sleeping; follow the safety guidance from your local fire-safety authority as well as the exact manual.

Who should choose the MC706?

Choose the MC706 if you want an upright electric heater that doubles as a more adjustable fan and you value the documented 12 fan speeds, four fan patterns, 120° oscillation or scheduled start. It is also the only one of these three for which the manual states a timer can turn the unit on or off. Its greater height and footprint can be a drawback in a narrow bedroom, beside a small desk or anywhere a cord would cross a path.

The Tower Heater 718 is the more compact alternative for a 29.7-inch body, five individually listed heat steps and a simpler three-speed fan. The Solaris Max (2nd Gen.) is shorter still and publishes a 70° sweep, but its page and US support manuals do not give a fully reconciled watt value for each step or a documented fan-speed count. If a height cap or particular fan requirement is essential, use those exact constraints in the finder instead of treating the three towers as interchangeable.