Lasko model comparisons
Lasko MyHeat 101 vs. Motion X CC27350: personal warmth or a room console?
The Lasko MyHeat 101 and Motion X CC27350 answer different questions. The 101 is a 200-watt tabletop heater intended to give one nearby person supplemental warmth; the CC27350 is a floor-standing ceramic console with up to 1,500 watts, multiple heat levels, a thermostat, remote and powered movement. The right choice depends less on which list of features looks longer than on the placement, supervision and level of heat you can actually use.
Choose the amount and reach of heat first
The MyHeat 101 has one 200 W heat setting and a built-in fan. Lasko describes it as personal warmth rather than a room heater. It can suit a narrow, supervised use case when you want a small amount of heat directed toward one person, and when a conventional room-heating appliance would be more than the task requires. The page’s 100-square-foot maximum-coverage figure is a manufacturer claim, not a measured temperature result. Do not interpret it as proof that this 200 W unit can heat any 100-square-foot room.
The Motion X CC27350 is a substantially higher-output appliance: its current product page lists an overall 900–1,500 W range with three selectable heat levels. That makes it the more plausible candidate when a larger area or more adjustable heat is needed, but the page does not map watts to each level or guarantee a particular room result. Lasko’s 300-square-foot maximum-coverage figure is likewise a claim rather than a room-by-room test. Do not convert either label into a promise about comfort, speed or evenness.
The bodies and operating plans are not interchangeable
The 101 is a small tabletop configuration. Its page lists a 6.1-inch height, while the manual directs placement on a stable, flat, level surface. The CC27350 is a 26.49-inch floor console, not a tabletop device. Its narrow upright profile may fit a different footprint, but it still needs a clear operating area. In both cases, body dimensions do not describe the safe space needed around the heater.
The page-linked 100 Series manual for the 101 requires three feet in front and one foot at the sides and rear from combustible materials. It says the heater is for residential supplemental use, not commercial, industrial or agricultural settings. This can conflict with the natural impulse to tuck a small “desk” heater under a work surface; check the clearance against real furniture and legs before deciding. The CC27350 manual likewise requires a stable floor position and substantial front and side/rear clearance. Neither compact body nor higher wattage excuses blocking the intake or outlet.
Controls distinguish a simple spot heater from a console
On the 101, there is one heat setting and a manual on/off control. The page does not list an adjustable thermostat, fan-only mode, remote, timer, oscillation or app control. Its thermal-overload protector is a safety response that requires unplugging, cooling and a manual reset—not an automatic countdown. Its instructions say not to leave the heater operating unattended.
The CC27350 adds three heat levels, fan-only operation, an adjustable Auto Eco routine, remote and a shutoff countdown up to twelve hours. The manual describes Auto Eco using High below the target, then Low as the room approaches it, then switching the heating element off above the target; that is a published control sequence, not a temperature-accuracy test. The heater can move the base horizontally and the grille vertically, but movement does not prove even warmth throughout a room. The countdown does not create permission to leave it unattended, and the CC27350 manual also prohibits that.
Which one fits your actual use?
Prefer the 101 when the goal is modest, close-range warmth in a dry residential setting, a tabletop arrangement works, and one setting is enough. Reject it if you need an adjustable temperature, an automatic timer, multiple heat levels or room-wide heat. The model page lists 2.8 pounds, but the native SKU record lists 1,361 grams; treat weight as unresolved when portability is decisive.
Consider the CC27350 when you need a freestanding console, more power choices, adjustable temperature, fan-only air movement or a remote and you have the open floor area to honor its manual. It is taller and more complex, not an easier answer for every room. For both heaters, use a direct wall outlet, keep away from wet locations and combustibles, and unplug when the instructions say to do so. See the full MyHeat 101 review and Motion X CC27350 review, then read the exact current manuals before selecting a place to operate either model.